Gate - Self-closing, Two-way Opening Gate
This is an old version of the page
Date published: 30 March, 2015
Date superseded: 1 March, 2017
Aim
The aim of this item is, where necessary, to provide a robust, effective and easy-to-use self-closing gate, suitable for as many user types as possible (including wheelchairs) where a path crosses a boundary or fence and to control livestock or vehicles.
A two-way opening gate is the preferable option in most circumstances, as the most easily usable by the full range of user types.
The gate can also be installed to perform as a vehicle barrier.
Eligibility
Any land is eligible, and the gate should be on an existing, upgraded or new path.
Requirements
Galvanised steel gate:
- 1.2 metre height from ground level
- 1.54 metre minimum width of opening
- made of galvanised steel H-frame, set in concrete to 0.7 metres depth
- two-way self-closing hinges
- bottom hinge pin reversed to prevent gate removal
- easy-operation latch, from horse-back and wheelchair
- gate stop
Timber gate:
- new-build timber gate with 1.5 metre minimum width of opening
- hanging post and shutting post minimum 2440x150x150 millimetres
- set in rammed stone and earth minimum 0.7 metres deep
- two-way self-closing hinges
- bottom hinge pin reversed to prevent gate removal
- hanging gate uprights minimum 75x75 millimetres
- easy-operation latch, from horse-back and wheelchair
- gate stop
Additionally:
- surfaces through gates must be firm, level and well drained.
- you must maintain a diary of photographic evidence of the construction phase, to include the works below ground level
Payment
You can claim £440 for each gate.
Inspections
The inspectors will check for:
- the location and extent of the work
Galvanised steel gate:
- 1.2 metre height from ground level
- 1.54 metre minimum width of opening
- two-way self-closing hinges
- bottom hinge pin reversed to prevent gate removal
- easy-operation latch, from horse-back and wheelchair
- gate stop
Timber gate:
- new-build timber gate with 1.5 metre minimum width of opening
- hanging post and shutting post minimum 2440x150x150 millimetres
- two-way self-closing hinges
- bottom hinge pin reversed to prevent gate removal
- hanging gate uprights minimum 75x75 millimetres
- easy-operation latch, from horse-back and wheelchair
- gate stop
Additionally:
- surfaces through gates are firm, level and well drained.
- you have maintained a diary of photographic evidence of the construction phase, to include the works below ground level